APPLICATION INSTRUCTIONS!

FOLLOW THESE APPLICATION INSTRUCTIONS FOR A FLAWLESS DECAL APPLICATION EVERY SINGLE TIME.

I have never had a decal not stick following this method, and once I shared this method with customers years ago, Ive never had anyone say "My decal didnt stick" UNLESS they said they didnt follow these instructions.. 

NOTE: The recommended temp for applying decals is around 70 degrees. There is some wiggle room here but do not apply decals in extreme hot or cold temps. The Vinyl and adhesive will act completely different in extreme temps so keep that in mind when applying.. We are not responsible for application errors or issues...

Every decal will stick and stay when these simple steps are followed.....

Step 1. Clean the area with rubbing alcohol. Do not use Windex, it will leave a residue behind that will prevent the decal from adhering well. 

Step 2. Peel the White or Blue backing paper off. Decals have been pre-peeled to ensure easy release.

Step 3. Slowly lower the decal onto the surface and rub in place firmly with a squeegee or credit card.  For best results wait a minute before continuing to step 4

Step 4.  Slowly peel the clear transfer tape off at an angle. Be careful not to pull the decal off the surface. If the decal pulls away from the surface repeat step 3 and firmly rub the decal onto the surface again.